Furman M-8LX 15A Standard Power Conditioner W/Adjustable Lights, 9 Outlets,...
- 2 Retractable incandescent Front-Panel Light Fixtures With Dimmer Control For Convenient Rack Illumination
- Ac Noise Filtering Reduces Radio Frequency (RFI) & Electromagnetic Interference (EMI)
- Spike & Surge Protection Ensures Equipment Stays Safe & Power Stays Clean
- 8 Rear-Panel Outlets & 1 Front-Panel Outlet
- 15 Amp Rating With Circuit Breaker
Furman M-8DX 15A Standard Power Conditioner W/Lights & Digital Volt...
- Noise Filtration
-AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI) - Surge Protection
-Spike & surge protection ensures equipment stays safe and your power stays clean - 9 Total Outlets
-8 rear panel outlets and 1 front panel convenience outlet - Digital Voltmeter
-Digital voltmeter display incoming line voltage - 15 Amp Rating
-15 amp rating, with circuit breaker - "Protection OK" Indicator
-Front panel indicator LED lets you know that your equipment is being protected - Wall Wart Spacing Indicator
-Rear outlets have been spaced to accomodate even the bulkiest of wall warts and adapters - Front Panel Pull-out Lights
-Two retractable incandescent light fixtures with dimmer control for convenient rack illumination
Furman GN-LED BNC Goose Neck 12V LED Work Light
- Four segment LED light for enhanced illumination
- Cool, efficient illumination
- Long lasting LED lights that rarely need replacing
- Locking collet male BNC connector
- 12 inches in length
- Powered by 12 VAC
- Replaceable head
Furman ADP-1520B NEMA 5-20R To NEMA 5-15P Adapter Cord, ...
- 20 amp to 15 amp plug
- With 12 amp circuit breaker
- 12 Inch long
- When adapting Furman 20 amp conditioners to a 15 amp outlet.
Decksaver Rode Rodecaster Pro Cover
- Fits the Rode Rodecaster Pro
- Durable Polycarbonate Shell
- Protects Controller from Dust & Moisture
- Protects from Accidental Impact
- Shields Knobs, Pads, and Faders
- Allows Room for Cables
Decksaver Cover for RANE ONE Controller
- Engineered specifically for the Rane One DJ Controller
- Patented smoked/clear transparency, unique to Decksaver.
- Protects against dust, liquid and impacts.
- Shields vulnerable faders, switches and knobs during transportation.
- Low profile design enables compatibility with most flight cases and travel bags.
- For RANE ONE Controller
- Polycarbonate with Smoked/Clear Finish
- Protects from Dust, Liquid, and Impact
- Shields Faders, Pads, and Controls
Decksaver Pioneer DJ DDJ-FLX6 cover
- Fits the Pioneer DDJ-FLX6 Controller
- Tough Polycarbonate Shell
- Sleek, Smoked/Clear Design
- Shields Delicate Jog Wheels and Controls
- Custom-Molded Fit
- Covers while Leaving Cables in Place
- Designed and Engineered in the UK
Decksaver Pioneer DJ DDJ-1000 Cover
- For DDJ-1000 rekordbox dj Controller
- Polycarbonate with Smoked/Clear Finish
- Protects from Dust, Liquid, and Impact
- Shields Faders and Controls
- Useful for Transport & Everyday Use
Decksaver LE Rode Rodecaster Pro Cover (LIGHT EDITION)
- Engineered specifically for the Rode Rodecaster Pro
- Light Edition made in the UK from super durable polycarbonate
- Protects your investment against dust, liquid and light impact
- Shields vulnerable faders, switches and knobs on the road, at home or in the studio; Low profile design enables compatibility with most flight cases and travel bags and accommodates cables
- Patented smoked/clear transparency, unique to Decksaver
Decksaver Light Edition (LE) Pioneer DJ DDJ-400 Cover
- Durable and discrete top cover protects the Pioneer DDJ-400 against impacts, dust, and spillage
- Made of polycarbonate, a plastic used in bulletproof glass
- Custom-molded cover tightly fits the contours of the DDJ-400
- Use cover with unit fully connected and ready for use
- Provides delicate jog wheels and controls with an additional level of protection inside flight cases and gig bags
- Sleek, smoked/clear design
- Lightweight (at 0.9 lb)
- Designed and engineered in the UK
Danelectro 3699 Fuzz/Octaver Pedal
- Fuzz/Octaver Pedal with Mid-boost
- Octave Footswitch; Volume
- Tone Controls
- Fuzz
Dream Bliss Series Crash Cymbal – 17″
- Surface: micro lathed by hand
- Bow: low gentle bridge
- Bell: small, articulate, clear
- Weight: thin tapers at edge
- Hammering: hand hammered before and after lathing
- Stick: woody rou
Calibrite ColorChecker Classic Nano (CCC-NANO)
Audio-Technica Phonograph cartridge, 1/2″ mount, Shibata
- Dual magnets match the left and right channels in a stereo record groove for outstanding channel separation and extended frequency response
- Shibata stylus provides greater surface contact with the record groove than elliptical styli, picking up ultra-high frequencies with less groove stress and distortion
- Paratoroidal coils improve generating efficiency
- Center shield plate between the left and right channels reduces crosstalk
- Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield
- Includes aluminum cantilever and mounting hardware
Audio-Technica Phonograph cartridge, 1/2″ mount, Microlinear
- Dual magnets match the left and right channels in a stereo record groove for outstanding channel separation and extended frequency response
- MicroLine stylus traces record grooves with incredible accuracy resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match
- Stylus’s multilevel shape also wears better than other styli while reducing the wear on your records
- Paratoroidal coils improve generating efficiency
- Center shield plate between the left and right channels reduces crosstalk
- Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield
- Includes aluminum tapered cantilever and mounting hardware
- VM Dual Magnet for Matched Left & Right
- Increased Channel Separation
- Frequency Response: 20 Hz to 25 kHz
- Lightweight Aluminum Headshell
- Gold-Plated Lead Wires
- Reduces Vibration
- Precise Stylus Placement with Lift
Audio-Technica Dual Moving Coil Cartridge, 1/2″ Mount, 2.2 x .12...
- Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
- The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
- The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
- Nude Microlinear stylus and boron cantilever provide lower distortion and high transient response
- A neodymium magnet and a premium permendur yoke with high saturation flux density and outstanding magnetic properties further enhance the concentrated magnetic field of the coil gap
- Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
- Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
included components: Cartridge, screwdriver, 2 washers, cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2), plastic protector, brush
Audio-Technica Dual Moving Coil Cartridge, 1/2″ Mount, Nude Elliptical Stylus
- Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
- The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
- The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
- Features low mass nude elliptical stylus and aluminum cantilever
- A neodymium magnet and pure iron yoke provide increased magnetic energy
- Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
- Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
Audio-Technica Dual Moving Coil Cartridge, 1/2″ Mount, Bonded Elliptical Stylus
- Independent Coils for Channel Separation
- High-Quality Magnetic Circuit
- Elliptical Bonded Stylus
- Boron Cantilever
- Designed to Minimize Distortion
- High Separation, Wide Response
- Pre-Threaded Body Requires No Nuts
Audio-Technica ATN-XP7 Replacement Stylus for AT-XP7, .3 x .7...
- Designed for AT-XP7 Cartridge
- Elliptical Bonded Stylus Tip
- Bonded Round Shank
- Plug in the USB Powered V49 MKII MIDI keyboard, and turn your PC, Mac, or iOS device into a feature packed production studio - Ideal for home studio producers, piano beginners, and desktop djs
- 49 Full-Size, Velocity Sensitive, Synth Action Keys alongside 8 velocity sensitive backlit beat pads with full level and note repeat controls, all in a design that fits easily into your workspace
- Create sample sounds or backing tracks with 4 MIDI-assignable knobs for virtual instrument and DAW control, plus octave and transpose buttons that enable access to the full keyboard range
- Pitch Bend and Modulation wheels for added expression, and an Arpeggiator with 6 modes for creating unique melodies and inspiring creativity
- Start Creating straight away with MPC Beats Software Suite and 60 piano lessons from Melodics, as well as easy point-and-click MIDI editor software that enables full control customization
Alesis V25 MKII 25-Key USB MIDI Keyboard Controller
- 25 Velocity-Sensitive Keys
- 8 Velocity-Sensitive Backlit Pads
- 4 Assignable Knobs
- 4 Assignable Buttons
- Pitch and Mod Wheels
- Includes USB Cable
- Production Software Bundle
Alesis Drum Essentials Bundle with Drum Throne and Headphones
- Everything you need to complete your Electric Drum Set – Electronic Drum Kit Accessory Bundle including a collapsible throne and on-ear headphones
- Kick Back and Play some Drums - Adjustable double-braced drum throne that provides comfort and support for drummers of all ages; the perfect size for any electric drum kit or acoustic drum set
- Space Saving Design – Easily collapsible drum throne that’s perfect for storage at home and travel to gigs or rehearsals. Ensure proper seat tightening to get optimum seat stability.
- Hear every detail of your Performance – Premium headphones with an on-ear design for ambient noise reduction; virtually universal compatibility with any electric drum module with a headphone output
- The Perfect Addition to Your Alesis Drums Kit - Includes all hardware and accessories needed to take full advantage of the Alesis Turbo Mesh Kit, Nitro Mesh Kit or Command Mesh Kit
512 LLT Audio Dynamic, Hypercardioid, Vocal XLR Microphone For Podcasting,...
- Custom-tuned for voice and speech: Excels at natural and clear audio for articulate expression
- Professional dynamic capsule: Delivers smooth, rich broadcast audio at close range—ideal for talk-focused content
- Designed for creators: Perfect for podcasts, broadcasts, streaming, and YouTube
- Focused, hypercardioid pattern: Creates a narrow pickup field that captures your voice and cuts out unwanted ambient noise
- No pops. No rumble. Built-in pop shield and low frequency filter cut out intrusive plosives and unwanted low-end rumble for a clean, uncompromised sound